Then we need to soft reboot the Rapberry PI with the modem connected. This value will later be used in the DefaultProduct value These are the device vendor and product codes. Your modem should be listed as one of the USB devices. The output will look similar to the screenshot below. Once rebooted open a terminal window and enter: We need to get the codes of the USB device in USB storage mode and USB modem mode.Ĭonnect your USB modem and reboot the Raspberry PI without LAN or Wifi connection ![]() Sudo apt-get install ppp usb-modeswitch wvdial For this we will use the classic ppp and wvdial programs.Ĭonnect your Raspberry PI to the internet via LAN or Wifi The other missing part is a way to connect to the cellular network with the USB modem from the Raspberry. There is a program called usb_modeswitch that we can use to do the switching ![]() ![]() ![]() When plugged in to the Raspberry PI the device is usually in USB storage mode. The main problem is that most USB modems act as two devices - a USB storage device and a USB modem. There are many guides available using the now defunct sakis3g script, but getting my modem to work required a bit more understanding. Setting up a USB 3G/4G modem on a Raspberry Pi is not a simple task.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |